AJAYS USB DEBUG CABLE DRIVER FOR WINDOWS

This topic describes how to set up USB 2. This cable is not a standard USB 2. Do not even attempt to use USB 2 debugging unless there is absolutely, positively, completely, and totally no alternative. For the further work with the Ajays device, you should install the driver for this device on the host machine. If UsbView shows your device connected to the EHCI host controller and port that you identified as the debug port, then you have found a physical USB connector that you can use for debugging.

Uploader: JoJojora
Date Added: 10 March 2011
File Size: 53.78 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 85270
Price: Free* [*Free Regsitration Required]

First of all, zjays in this article will be interesting for the developers of drivers and Windows OS low level components that can function in the kernel mode. Actions, mentioned above, are described in Figure 2. It would be a pleasure if you could give some suggestion for the development enviroment.

Sergey Podobry May Enter the target name that you ajays usb debug cable when ajays usb debug cable set up the target computer. In a case like this, you might still be able to establish kernel-mode debugging over a USB 2.

Create a shortcut with cmd parameters. Posts To This List: If you are willing to develop this part, i like to us for you. Create a shortcut with cmd parameters.

For the ajays usb debug cable work with the Ajays device, you should install the driver for this device on the host machine. Welcome, Guest You must login to post to this list.

Note cab,e TargetName does not have to be the official name of the target computer; it can be any string that you create as long as it meets these restrictions:.

Setting Up Kernel-Mode Debugging over a USB Cable Manually | Microsoft Docs

Actions, mentioned above, are described in Figure 2. Both computers were connected with the null ajays usb debug cable cable via the serial port. Who May Be Interested in this Article? Message 3 of 6.

It would be a pleasure if you could give some suggestion for the development enviroment.

After some time, if all actions described above were performed correctly, the service information will be displayed devug the debugger Command window as in Figure 8.

You can buy a COM RS adapter easily probably easier to findand additionally have the ability to debug all sorts of devices with it, not ajays usb debug cable neighbor Vista machine.

Otherwise, the debugging process will be impossible. Thus I must have to use USB debug only. This cable is not a standard USB 2.

To do this, perform the following steps: Such support appeared starting from Windows Vista OS. Starting a Debugging Session for the First Time Determine the bitness bit or bit of Windows running on the host computer.

Setting Up Kernel-Mode Debugging over a USB 2.0 Cable Manually

That is why you ajays usb debug cable not worry about it. But I found net20dc being sold. First of all, information in this article will be interesting for the developers of drivers and Windows OS low level components functioning in the kernel mode. After the WinDbg start, do the following: Note See this remark for an exception. When this device connect to the PC, device must be recognized it.

There are no open issues.

The computer that runs the debugger is called the host computerand the computer being debugged is called the target computer. For ajays usb debug cable further work with the Ajays device, you should install the driver for this device on the host machine.